Product Details:
Minimum Order Quantity | 1 Piece |
Output Flow | 0 - 20 Lpm |
Power Voltage | AC 220 V, 50-60 Hz |
Power Consumption | 350 W |
Output Pressure | 0 - 0.4 MPa |
Dimension | 400 x 310 x 640 mm |
Weight | 34 Kg |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand/Make | Athena |
Start up time | 30 minutes |
Type | Zero Air Gas Generator |
For ZAG | 5 Amp |
Electrical requirements | 230 V AC, 50 Hz, 1 ph |
Room temperature | 5 Deg C - 25 Deg C |
Method of purification | Pressure Swing Adsorption (PSA) & HC Cracking furnace |
Capacity of ZAG | 1 LPM at 5kg/cm2 |
Zero Air Gas Generator for TOC Analyzer, Zero Air Generator for TOC Analyzer produces a continuous flow of high purity Zero Air at selected pressure. Compressor takes the air from atmosphere, the hot air is than passed through copper cooling coil. The cool air is than passed through furnace where hydrocarbons are cracked at high temperature (temp. range - 400°C to 500°C) in presence of catalyst. The furnace reaction at higher temperature breaks the hydrocarbon into CO2 & H2O. Water is drained away through 5μ & 0.01μ filter. The modular pressure swing adsorption unit operates with alternating pressure increase and decrease. Untreated air flows under pressure through the reaction towers containing molecular sieve adsorber. Moisture, CO, CO2, THC and other unwanted components in the air are adsorbed, leaving Zero Air Gas of required purity
Salient Features:
Specifications:
PRINCIPLE SPECIFICATIONS | ATZ-02 (for TOC Analyser) |
Moisture | < 0.5 ppm |
Total Hydro Carbon | < 0.2 ppm |
CO & CO2 | < 0.2 ppm |
Purity | TOC/XL grade |
Micro Particulates | < 0.01μ |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand/Make | Athena |
Method of purification | Pressure Swing Adsorption |
ZAG | 4 Amp |
Electrical requirements | 230 V AC, 50 Hz, 1 ph |
Start up time | 5 minutes |
Room temperature | 5 Temp C - 25 Temp C |
Capacity of ZAG | 4 LPM at 5kg/cm2 |
Introduction:
Zero Air Generator produces a continuous flow of high purity Zero Air at the selected pressure. The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease. Untreated air flows under pressure through the reaction towers containing molecular sieve adsorber. Moisture, CO, CO2, THC and other unwanted components in the air are adsorbed, leaving Zero Air Gas of required purity. During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle. The residual impurity content of Zero Air Gas can be reduced to practically any value required for the user''s application. The Zero Air Generators are suitable for use in laboratories and industrial environments.
Applications:
Technical Specification:
Specifications | ATZ-01 (for 2-5 GC''s), for Imported GC |
Moisture | < 2 ppm |
Total Hydro Carbon | < 0.5 ppm |
CO & CO2 | < 2 ppm |
Purity | GC/UHP grade |
Micro Particulates | < 0.01μ |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand/Make | Athena |
Weight Kg | 26 |
LxWxH mm | 430 X 290 X 400 |
Power Voltage | AC 220 50-60HZ |
Model | ATZ-4000 |
Output Flow(L/min) | 0-4 (0-4000ml/min) |
Output Pressure(MPa) | 0-0.4 |
Power Consumption(W) | <160 |
Additional Information: