Product Details:
Minimum Order Quantity | 1 Piece |
Brand/Make | Athena |
Moisture | 5 ppm |
Room temperature | 5 Degree C - 45 Degree C |
Startup Time | 1 hour |
Available Automation Grade | Automatic, Semi-Automatic |
Flow rate Capacity | 12 LPM ( filtered zero air ), 8 LPM ( purified dry air ), 4 LPM (pure nitrogen) |
Pressure | 5 kg/cm2 or 60 psig |
Purity | 99.99% |
Method of Purification | Pressure Swing Adsorption |
Input Voltage | 230 V AC, 50 Hz, 1 Phase, 2 Amp |
Product Details:
Minimum Order Quantity | 1 Piece |
Brand/Make | Athena |
Model | ATNG-LS |
Electrical requirements without Compressor | 230 V AC, 50 Hz, 1 Ph, 2 Amp |
Startup time | 1 hrs / programmable timer |
Method of purification | Pressure Swing Adsorption |
Room temperature | 5 Degree C to 45 Degree C |
Introduction:
Nitrogen Gas Generator produces a continuous flow of high purity Nitrogen at the selected pressure. The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease. Untreated air flows under pressure through the reaction towers containing carbon molecular sieves adsorber. Moisture, CO, CO2, THC, O2 and other unwanted components in the air are adsorbed, leaving Nitrogen Gas of required purity. During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle. Flow range available from 10 LPM to 30 LPM and above.
Technical Specifications:
Specifications | For LC-MS (TNG-02L) | For LC-MS-MS (TNG-02LS) (for Sciex model) |
Flow rate Capacity of N2 Generator | 6 to 30 LPM (as per selection of model) | 12 LPM (filtered zero air), 8 LPM ( purified dry air), 4 LPM (pure nitrogen) |
Pressure | 5 kg/cm² or 100 psig or 60 psig | |
Purity | 99.90% | > 99.99% |
Moisture | 5 ppm | 5 ppm |
Total Hydro Carbon | < 0.5 ppm | < 0.5 ppm |
CO & CO2 | < 2 ppm | < 2 ppm |
Micro Particulates | < 0.01μ | < 0.01μ |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Automation Grade | Automatic |
Material | Steel |
Model Name/Number | ATN-LCMSMS, LCMS |
Capacity | 10-70 lpm |
Dew Point | -70C |
Gas Type | Nitrogen, Dry Air and Zero Air |
Design Type | Standard, Customised |
Weight | 60-80 kgs |
Frequency | 50 Hzs |
Power | 150W |
Voltage | 220V |
Purity | 99.9999% |
Size | 550 x 600 x 750 mm |
Connectivity | SS tube |
Display | Digital |
Color | Athena Grey |
Brand/Make | Athena |
Output Flow | 0-100 Lpm |
Specifications:
Specifications | For LC-MS (TNG-02L) | For LC-MS-MS (TNG-02LS) (for Sciex model) |
Flow rate Capacity of N2 Generator | 6 to 30 LPM6 to 30 LPM (as per selection of model) | 12 LPM (filtered zero air), 8 LPM ( purified dry air), 4 LPM (pure nitrogen) |
Pressure | 5 kg/cm² or 100 psig / 60 psig | |
Purity | 100.00% | > 99.995% |
Moisture | 2 ppm | 2 ppm |
Total Hydro Carbon | < 0.5 ppm | < 0.5 ppm |
CO & CO2 | < 2 ppm | < 2 ppm |
Micro Particulates | < 0.01μ | < 0.01μ |
Method of purification | Pressure Swing Adsorption | |
Room temperature | 5 °C - 45 °C | |
Startup time | 1 hrs / programmable timer | |
Electrical requirements without Compressor | 230 V AC, 50 Hz, 1 Ph, 2 Amp |
Product Details:
Minimum Order Quantity | 1 Piece |
Capacity | 0-100 lpm |
Usage/Application | Laboratory |
Brand/Make | Athena |
Automation Grade | Automatic |
Material | Steel |
Automatic Grade | Automatic |
Purity | 99.999% |
Frequency | 50KHzs |
Voltage | 220 V AC 50 hzs |
Size | 500 x 600 x 700 mm |
Color | Athena Grey |
Weight | 60-80 kgs |
Design | Compact Size |
Flow Rate | 10 lpm -70 lpm |
Inlet Pressure | 0-7 Bar |
Main Display | Digital |
Condition | New |
Nitrogen Generator for LC-MS / LC-MS-MS:
Specifications:
Technical Specification for N2 Generator for LCMS: | |||
SPECIFICATIONS | For LC-MS (TNG-02L) | For LC-MS-MS (TNG-02LS) (for Sciex model) | |
Flow rate Capacity of N2 Generator | 6 to 30 LPM (as per selection of model) | 12 LPM (filtered zero air) | |
8 LPM ( purified dry air) | |||
4 LPM (pure nitrogen) | |||
Pressure | 5 kg/cm² or 100 psig or 60 psig | ||
Purity | 99.90% | > 99.99% | |
Moisture | 5 ppm | 5 ppm | |
Total Hydro Carbon | < 0.5 ppm | < 0.5 ppm | |
CO & CO2 | < 2 ppm | < 2 ppm | |
Micro Particulates | < 0.01μ | < 0.01μ | |
Method of purification | Pressure Swing Adsorption | ||
Room temperature | 5 °C - 45 °C | ||
Startup time | 1 hrs / programmable timer | ||
Electrical requirements without Compressor | 230 V AC, 50 Hz, 1 Ph, 2 Amp |
Product Details:
Minimum Order Quantity | 1 Piece |
Flow Rate(LPM)/(Nm3/hr) | 25 lpm |
Air Compressor (kW) | 5.5 kW |
Technology Used | PSA (Pressure Swing Adsorption) |
Purity Of Nitrogen | 97+-3% |
Application | Industrial |
Model Name/Number | AT-LCMSMS1 |
Capacity | Sciex 4000 4500 6500 |
Dew Point | -60 |
Gas Type | Nitrogen Air Zero Air |
Design Type | Customised, Standard |
Approval & Licenses | ISO, U.S. FDA, CE |
Features:
* Safe and convenient
* Compact structure. Take up very little laboratory space.
* Nitrogen generators supply ideal ultra pure nitrogen
for ELSD, CAD Detector, FTIR , GC(Gas Chromatography), LC/MS(Liquid Chromatograph/Mass Spectroscopy) and Thermal Analyzer.
* Continuously generate ultra pure nitrogen through Pressure Swing Adsorption (PSA) technology.
No longer need to use inconvenient and dangerous high pressure nitrogen cylinders in laboratory.
Why Choose Athena Nitrogen Generator Units:
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Flow Rate(LPM)/(Nm3/hr) | 100 LPM / 6 Nm3/Hr |
Air Compressor (kW) | 5.5 kW |
Technology Used | PSA (Pressure Swing Adsorption) |
Purity Of Oxygen | 99% |
Purity Of Nitrogen | 99% |
Application | Medical |
Model Name/Number | ATN-LCMS |
Capacity | 32 LPM |
Dew Point | - 40 |
Gas Type | Nitrogen |
Design Type | Customised |
Weight | 50 Kg. |
Approval & Licenses | CE, U.S. FDA, ISO, IAF |
Power | 500 watts |
Outlet/Discharge Pressure | 5 Bar (g) |
Type of Compressor | Lubricated Screw Air Compressor |
Voltage | 230 |
Purity | 99.99 |
Type of Dryer | Refrigerated Type Air Dryer |
No. of Air Receiver | 2 |
No. of Storage Tank / Buffer Tank | 1 |
Automation Grade | Fully-Automatic |
Design | Customized |
Filtration Stages | 2 Stage |
Space Required (L*B*H) | 600X850X700 mm |
Operating Temperature (degree celsius) | 35 |
Size | 490X420X350 |
Operating Pressure | 4 Bar |
Color | Grey and White |
Pressure Range | 0 to 8 Bar |
Country Origin | Made In India |
Humidity | 85% |
Maximum Flow | 32 to 62 |
Sound Level | 60 db |
Operating Temp | 35 |
Moisture Content | 1 PPM |
Display Mode | LCD |
Nitrogen Outlet Pressure | 0 to 6 Bar |
Hose Length | 1 Meter |
Display Type | LCD |
Country of Origin | Made in India |
LCMS Nitrogen Generator
Technical Specification:-
• Outlet Flow N2: 20LPM
• Outlet Pressure N2: 7bar (kg/cm²) 100 psi
• Purity: 99.9%
• Purity: UHP / LCMS Grade
• Micro Particulate: Nil
• Outlet Connection: 1/4" OD
• Method of Purification: Pressure Swing Adsorption
Technologies
• PSA & Depressurisation
• Valves: PLC based Pneumatic 2 way
• Tank received attached backside of N2 generator
• With In-built Oil Free Air Compressor for above
generator
• The Nitrogen gas generator should be based on
pressure swing adsorption (PSA) technology with
two columns should operate alternately in
adsorption & desorption cycle to produce a
continuous supply of Laboratory Grade Nitrogen 24
hour a day.
And also available as per the customization.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Design Type | Standard, Customised |
Brand/Make | Athena |
Model | ATG-LCMS |
Capacity | 35-40 lpm |
Moisture | 2 ppm |
Startup time | 1 hrs / programmable timer |
Electrical requirements without Compressor | 230 V AC, 50 Hz, 1 Ph, 2 Amp |
Method of purification | Pressure Swing Adsorption |
Flow Rate | 10 LPM to 30 LPM |
Room temperature | 5 Temp C - 45 Temp C |
Nitrogen Gas Generator produces a continuous flow of high purity Nitrogen at the selected pressure. The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease. Untreated air flows under pressure through the reaction towers containing carbon molecular sieves adsorber. Moisture, CO, CO2, THC, O2 and other unwanted components in the air are adsorbed, leaving Nitrogen Gas of required purity. During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle.
Technical Specifications:
Specifications | For LC-MS (TNG-02L) | For LC-MS-MS (TNG-02LS) (for Sciex model) |
Flow rate Capacity of N2 Generator | 6 to 30 LPM (as per selection of model) | 12 LPM (filtered zero air),8 LPM ( purified dry air), 4 LPM (pure nitrogen) |
Pressure | 5 kg/cm² or 100 psig / 60 psig | |
Purity | 100.00% | > 99.995% |
Moisture | 2 ppm | 2 ppm |
Total Hydro Carbon | < 0.5 ppm | < 0.5 ppm |
CO & CO2 | < 2 ppm | < 2 ppm |
Micro Particulates | < 0.01μ | < 0.01μ |
Product Details:
Minimum Order Quantity | 1 Piece |
Flow Rate(LPM)/(Nm3/hr) | 40 |
Air Compressor (kW) | 5.5 kW |
Technology Used | PSA (Pressure Swing Adsorption) |
Purity Of Nitrogen | 97+-3% |
Application | Industrial |
Model Name/Number | AT-LCMS1 |
Capacity | 40 Lpm |
Dew Point | 60C |
Gas Type | Nitrogen |
Design Type | Standard, Customised |
Approval & Licenses | ISO, U.S. FDA, CE |
Features:
* Safe and convenient
* Compact structure. Take up very little laboratory space.
* Nitrogen generators supply ideal ultra pure nitrogen
for ELSD, CAD Detector, FTIR , GC(Gas Chromatography), LC/MS(Liquid Chromatograph/Mass Spectroscopy) and Thermal Analyzer.
* Continuously generate ultra pure nitrogen through Pressure Swing Adsorption (PSA) technology.
No longer need to use inconvenient and dangerous high pressure nitrogen cylinders in laboratory.
Why Choose Athena Nitrogen Generator Units:
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Flow Rate(LPM)/(Nm3/hr) | 35 |
Air Compressor (kW) | 5.5 kW |
Technology Used | PSA (Pressure Swing Adsorption) |
Purity Of Nitrogen | 97+-3% |
Application | Industrial |
Model Name/Number | AT-LCMS2 |
Capacity | 35 lpm |
Dew Point | 60 |
Gas Type | Nitrogen |
Design Type | Standard, Customised |
Approval & Licenses | ISO, CE, U.S. FDA |
Features:
* Safe and convenient
* Compact structure. Take up very little laboratory space.
* Nitrogen generators supply ideal ultra pure nitrogen
for ELSD, CAD Detector, FTIR , GC(Gas Chromatography), LC/MS(Liquid Chromatograph/Mass Spectroscopy) and Thermal Analyzer.
* Continuously generate ultra pure nitrogen through Pressure Swing Adsorption (PSA) technology.
No longer need to use inconvenient and dangerous high pressure nitrogen cylinders in laboratory.
Why Choose Athena Nitrogen Generator Units:
Additional Information:
Product Details:
Flow Rate(LPM)/(Nm3/hr) | 40 |
Air Compressor (kW) | 5.5 kW |
Technology Used | PSA (Pressure Swing Adsorption) |
Purity Of Nitrogen | 97+-3% |
Model Name/Number | AT-LCMS3 |
Capacity | 40 lpm |
Dew Point | 60C |
Gas Type | Nitrogen |
Design Type | Standard, Customised |
Approval & Licenses | CE, ISO, U.S. FDA |
Features:
* Safe and convenient
* Compact structure. Take up very little laboratory space.
* Nitrogen generators supply ideal ultra pure nitrogen
for ELSD, CAD Detector, FTIR , GC(Gas Chromatography), LC/MS(Liquid Chromatograph/Mass Spectroscopy) and Thermal Analyzer.
* Continuously generate ultra pure nitrogen through Pressure Swing Adsorption (PSA) technology.
No longer need to use inconvenient and dangerous high pressure nitrogen cylinders in laboratory.
Why Choose Athena Nitrogen Generator Units:
Product Details:
Minimum Order Quantity | 1 Piece |
Flow Rate(LPM)/(Nm3/hr) | 32 lpm |
Air Compressor (kW) | 5.5 kW |
Technology Used | PSA (Pressure Swing Adsorption) |
Purity Of Nitrogen | 99% |
Application | Industrial |
Automation Grade | Automatic |
Gas Type | Nitrogen Air Generator for LCMSMS |
Frequency | 50 |
Approval & Licenses | ISO, U.S. FDA, CE |
Method Of Purification | PSA & Membrane |
Nitrogen / AIR Combination Gas Generator
Model AT-LCMSMS-02 for LC-MS-MS (for Sciex Model)
HSN Code : 8421-3990
SAC : 9954-5
a) Air Dryer timer based operation
b) N2 purifier to remove O2 & all other unwanted impurities & produces N2 upto LC-MS-MS grade
c) Serge receiver with pressure regulator & valve inbuilt
d) Membrane based life 10-12 years
Membrane Nitrogen Gas Generator
Capacity Nitrogen : 12 lpm Membrane @ 10 bar
Pressure : 7 bar
Purity : LCMSMS Sciex Model
Method of Purification:Membrane Technologies.
Tri Gas Nitrogen / AIR Combination Gas Generator
Model for LC-MS-MS
(for SCIEX 4500 Model)
Nitrogen Gas Generator based for Sciex LC/MS/MS Wall, Mounted, with External Compressor which consist of:
a) Curtain Gas (Nitrogen) Flow - 12 LPM, Curtain Gas Pressure - 100 PSI, Purity - LCMS Grade
b) Source Gas (Dry Air) Flow - 24 LPM, Pressure - 100 PSI, Purity - LCMS Grade
c) Exhaust Gas (Dry Air) Flow - 14 LPM, Pressure - 60 PSI, Purity - Filtered Air
d) No Electrical Supply Requirement for Generator
e) Compressed Air Inlet Connection - 1/4" OD
f) Gas Outlet Connection - 1/4" OD
Capable of supplying multiple Sciex LC-MS-MS instruments
g) Lower maintenance requirement and ensures long life of the generator
h) Completely silent in operation
i) Automatic Drain system
j) Automatic moisture purge system
Compact in size
Additional Information: